Chinese English
introdeuction
  Measurement Department
The Institute of Mechanical and Manufacturing Measurement
The Institute of Electrical and Electronic Measurement
the Institute of Ionizing radiation measurement and Medicine project
Thermal Measurement Institute
Stoichiometric Institute
Metrology Products & Engineering Quality Testing Institute
Flow Measurement Testing Center
General research institute of metrology
 
 
  The Institute of Electrical and Electronic Measurement
The Institute of Electrical and Electronic Measurement

  The Institute of Electrical and Electronic Measurement Regulations owns five laboratories which include high pressure laboratory, optical and radio frequency detection room, Energy Laboratory, acoustic and vibration laboratory, gauge and time-frequency laboratory.
  the regulation and high-pressure laboratory
  It has all the features of the regulatory apparatus test and calibration capability (including withstand voltage, leakage current, insulation resistance, ground-resistance, etc.), with 0.1 300 kV AC and DC voltage standard, they can conduct 0.5 and below 300 kV AC and DC voltage source voltage meter and the test or calibration . Current Transformer 0.002 standard device for measuring range of 5 kA, voltage transformer standard device for measuring an area of 0.002 of 10 kV, 35 kV 0.01. They can conduct corresponding levels of current transformer and voltage transformer testing. At the same time has a calibrator and below the test transformer capacity. Other than the PSA can be carried out bridge, do calibration and testing for dielectric loss tester, AC-DC spark machine, such as electrostatic test instrument.
  Optical detection room:
  This room projects major in the optical luminosity, color and optometry (refraction), and other measurement, optical measuring instruments to domestic and foreign stereotypes identification of new product prototype tests, and other technical work. To carry out light meter luminance meter, color or brightness, color analyzer, luminous intensity, color temperature table, all kinds of light boxes, precious stones fluorescent lamp, here lights, or UV irradiation, motor vehicle headlamps checking device, motor vehicle headlamps detector calibration, luminous flux standard lights, luminous flux measurement systems photometric equipment; color measurement of color, white meter whiteboard, reflectance detector, transmission density of black-and-white, black-and-white film density, photoelectric gloss meter comparison of color measurement instruments, such as color category; Lensometer, computer optometry, optometry lenses bins Centrometer, depending in Table light boxes, standard lenses, spectacles such as optical lenses (refraction) category of equipment. RF signal generator project can be undertaken, network analyzer, spectrum analyzer, digital mobile communications integrated tester, and other RF, microwave project approval / calibration; Dynamic and static resistance strain meter, and other projects should test variables / calibration; Surge generator, pulse-generator, Artificial electromagnetic Immunity power networks, and other equipment calibration; Room and shielding, shielding box, power amplifiers, attenuators, power distributor, selected frequency Level Table, Level oscillator, charge amplifier, and other equipment calibration work. It have purchased the Agilent, Rohde & Schwarz and other companies advanced equipment from 2004, capable of producing 20 GHz and 6 GHz signal simulation of digital signal, but also with the measurements 26.5 GHz analog, digital signal capability to reach the domestic advanced level.
  Energy Laboratory :
  Now it take test / calibration projects in single-phase watt-hour meter, three-phase watt-hour meter, exchange Meter, electricity meter testing equipment, standard batteries, voltage meter ammeter power gauge,and so on. The existing set of companies from Germany EMH introduction of three-phase high-precision Meter calibration device, the accuracy of grading 0.01. The following may test 0.02 single, standard three-phase watt-hour meter, electricity parameter tester, digital power meter, power transmitter. Have a 0.02 high-precision three-phase watt-hour meter can go down to factory test 0.05 following single, three-phase watt-hour meter calibration device. 2000 authorized by the State Quality and Technical Supervision for the identification of national stereotypes Meter authorized laboratory, which can carry out test and stereotypes Meter prototype test; 2002 completed the work of the province's highest Meter installation of the examination, passed to build a national measurement standard examination has reached the advanced international level.
  Acoustic and vibration laboratory:
  It responsibles for the acoustic and vibration transfer in Jiangsu region, providing calibration services and engineering verification testing, the value of 1 million yuan with the acoustics and vibration analysis equipment, carry out sophisticated, pulse, integral and general sound level meter, noise statistical analyzer, spectrum analyzer noise, the sound level calibrator, Detroit Voice and so test and calibration. Electro-acoustic tests conducted telephone systems, loudspeakers Tester, electro-acoustic performance test instrument, tuning fork and tuning equipment calibration. In multi-function conference room, stadiums, housing indicators such as acoustic testing, including noise measurement, the reverberation time measurements, environmental noise measurements, and so on, the whole (half) anechoic chamber, audiometry Room (medical) calibration acceptance. On hearing of the medical, hearing aids test system, ultrasonic flaw detector, wheel balancing machines and other equipment testing and calibration implemented. General Instrument in measuring vibration (vibration dollars), accelerometers, vibration test stand (mechanical, electrical, random), digital electrical vibration test systems, test rig impact, vibration calibration, Pulse noise / vibration test system, dynamic testing instrument foundation pile of test equipment .
  Gauge and time-frequency laboratory:
  It takes test / calibration projects on high/Low frequency voltage, distortion, pulse, Blur, time frequency, AC-DC voltage / current standard signal generator, the standard resistance, the TAC DC bridge, DC potentiometer, DC Resistance bins. 2000 established time frequency rubidium atomic frequency standard device, the accuracy of better than 1 × 10-12, every 300 years is not more than one second error of accuracy. Also has the value of 500,000 yuan multifunction calibrator FLUKE companies , take test / calibration on all kinds of digital instruments, the process of checking electricity meters, clamp ammeter, and other instrumentation.
  Director : Sha Lefei 025 - 84636963
  Vice director, the dean of regulation and high-pressure room: Pan baoxiang 025-84636980
  Dean of optical and frequency detection room: Jiqing 025-84636982
  Dean of Gauge and time-frequency laboratory: Zang Xiaoxia 025-84636981
  Dean of energy Laboratory: LIU Yi 025-84636964
  Dean of Acoustics and Vibration Lab: Liu Weili 025-84636935 Registered Office:
  regulation and high-pressure room :025 - 84636965
  optical and frequency detection room :025 - 84636960, 84636982
  Gauge and time-frequency laboratory :025 - 84636966, 84636981
  Energy Laboratory: 025-84636964
  Acoustic and vibration laboratory :025 - 84636935
 

Jiangsu Institute of Metrology 2007 All rights reserved E-mail:jsjl@jsmi.com.cn
Tel:025-84636901 Fax:025-84482128 Add:the 3rd Guanghua Strand , Nanjing(210007)
Today visits: 66 , Total visits: 38597, The maximum amount of IP visit 18249